Module 1: IPv4 Addressing and Subnetting

• Hardware Addressing
• Logical Addressing
• Internet Protocol (IP)
• IPv4 Addressing
• Decimal to Binary Conversion
• Binary to Decimal Conversion
• The Subnet Mask
• IP Address Classes
• CIDR (Classless Inter-Domain Routing)
• Address Classes vs. Subnet Mask
• Subnetting
• Determining the Range of Subnetted Networks
• Private vs. Public IPv4 Addresses
• Reserved IPv4 Addresses
• The IPv4 Header
• Resolving Logical Addresses to Hardware Addresses
• The ARP Table
• Troubleshooting IP using ICMP

Module 2: IPv6 Addressing

• IPv6 Basics
• The IPv6 Address
• The IPv6 Interface ID and EUI-64 Format
• The IPv6 Address Hierarchy
• Link-Local IPv6 Addresses
• Site Local IPv6 Addresses
• Multicast IPv6 Addresses
• Required IPv6 Addresses
• IPv6 Addresses and URLs
• ICMPv6
• Auto configuration of Hosts
• Configuring IPv6 OSPF (OSPFv3)
• Configuring an IPv6 Tunnel

Module 3: TCP and UDP

• Transport Layer Protocols
• Port Numbers and Sockets
• Transmission Control Protocol (TCP)
• Establishing a TCP Connection
• Terminating a TCP Connection
• The TCP Header
• User Datagram Protocol (UDP)

Module 4: The Routing concepts

• Administrative Distance vs. Metric
• Classful vs Classless routing protocols
• Limitations of Classful Routing
• Static vs. Dynamic Routing
• Dynamic Routing Categories
• Distance-vector Routing Protocols
• Configuring Static Routes
• Advanced Static Routes Parameters
• Default Routes

Module 5: Routing Information Protocol

• RIP (Routing Information Protocol)
• RIP Versions
• RIPv2 Configuration
• RIP Timers
• RIP Passive Interfaces
• RIPv2 Authentication
• Altering RIP’s Metric
• Troubleshooting RIP

Module 6: Enhanced Interior Gateway Routing Protocol

• EIGRP (Enhanced Interior Gateway Routing Protocol)
• The EIGRP Topology Table
• EIGRP Route States
• EIGRP Metrics
• Configuring Basic EIGRP
• EIGRP Passive Interfaces
• EIGRP Auto-Summarization
• EIGRP Manual Summarization
• EIGRP Authentication
• EIGRP Load-Balancing
• EIGRP Stubs
• EIGRP, Frame-Relay, and Bandwidth

Module 7: Open Shortest Path First

• OSPF (Open Shortest Path First)
• OSPF Neighbors
• OSPF Designated Routers
• OSPF Network Types
• Configuring OSPF Network Types
• The OSPF Hierarchy
• LSAs and the OSPF Topology Database
• Configuring Basic OSPF
• OSPF Passive-Interfaces
• OSPF Authentication
• OSPF Virtual Links
• OSPF Area Types
• OSPF and Default Routes
• Advanced OSPF Configuration

Module 8: IS-IS (Intermediate System -to- Intermediate System)

• IS-IS Fundamentals
• IS-IS Protocols and Addressing
• IS-IS Packet Types
• IS-IS Neighbors
• The IS-IS Hierarchy
• Basic IS-IS Configuration
• IS-IS Authentication

Module 9: Border Gateway Protocol

• Border Gateway Protocol (BGP)
• When to Use BGP
• Configuring BGP Neighbors
• BGP Synchronization
• BGP Route-Reflectors
• BGP Attributes

Module 10: Advanced Routing Functions

• Route Redistribution Basics
• Redistributing into RIP
• Redistributing into OSPF
• Redistributing Static and Connected Routes
• Pitfalls of Route Redistribution – Administrative Distance
• Access Control Lists (ACLs)
• Telnet Access List
• Advanced Wildcard Masks
• Route Filtering and Route-Maps
• Route-Maps
• Multicast Types of “packets”
• Multicast Concepts
• Multicasts and Routing
• Multicast Path Forwarding